Loading... Please wait...

No 6 EPDM Masterflash 127-228mm (5 to 9 inch) - Low Temp

  • No 6 EPDM Masterflash 127-228mm (5 to 9 inch) - Low Temp
Price:
£35.00
Quantity:


Product Description

fireplacestorelogo__74871.jpg

No 6 EPDM Masterflash 127-228mm (5 to 9 inch) - Low Temp

 

Suitable for profiled sheeting and flat panel surfaces with external pipe diameters of (5 to 9 inch) / 127 to 228mm.

 

APPLICATION
Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -55°C to 135°C.

 

CONSTRUCTION
Made of EPDM, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

The one piece construction allows for quick and easy on-site installation - usually taking no longer than five minutes.
The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

 

INSTALLATION
1. Choose pipe opening and trim using a stanley knife or scissors.

2. Slide flashing over pipe (you may need to lubricate the flashing with some grease).
3. Form the flashing to the same profile as the roof.
4. Apply sealant (contained in the Fixing Kit).
5. Fasten using the screws and caps (supplied in the Fixing Kit).



ONE Standard Fixing Kit is required to install this flashing.

 

 

Please Note: UK delivery for flue pipes and flue pipe accessories cost £12 per shipment. This means, if you order one flue pipe it will cost £12 for delivery, or if you order 2 flue pipes and a few bends it will also cost £12 delivery. Please choose 'FLUE SYSTEM PARTS' during checkout to apply this charge. Failure to do so will result in a member of our team contacting you to collect delivery payment. This may delay the processing of your order. If the total of your order of flue pipe and flue pipe accessories exceeds £250, then UK delivery is free and you should select 'Free Shipping' during checkout


You Recently Viewed...